UV DTF flatbed (generic CMYK+White+Varnish) / UV DTF Film A (crystal / domed sticker)

UV DTF Film A (crystal / domed sticker) on UV DTF flatbed (generic CMYK+White+Varnish)

guide
Surface prep
Fully cure White+CMYK before first varnish pass
Layer order
White → CMYK → Varnish ×4–6 (cure between varnish passes)
White layers
as designed (opaque underbase)
CMYK layers
1
Varnish
4–6 passes for visible crystal dome; 1=flat gloss; 2–3=slight raise; 7+=crack risk if rushed
Print mode
Multi-pass varnish with staged UV cure between passes
Durability
Let finished stack stabilize before flexing/cutting; rush-stacking causes cracking/yellowing
Notes
Crystal 3D look comes from stacked cured varnish height, not a 3D mode button. Sweet spot for shops is 4–6 varnish layers.
Source: SHL Supply / WangWei · 2026-07-30
Summarized from the linked source. Test on scrap before production runs.