ColDesi UV DTF system / UV DTF A film (then laminate B roll)

UV DTF A film (then laminate B roll) on ColDesi UV DTF system

official
Surface prep
Load A sheet shiny side up on vacuum bed; remove clear liner before print; 0.5" gaps between designs and page edges
Layer order
White Underbase → Color → Clear Overcoat
White layers
1 underbase
CMYK layers
1
Varnish
Clear at 70% density with small spread (choke)
Print mode
White & Color: 1440×720 dpi Unidirectional; Clear: 1440×720 dpi Bidirectional
Durability
Laminate B at 190°F / 88°C; cure/bond 24h after apply before wash/adhesion test
Notes
Page size 11.81×16.56". Confirm machine-specific RIP queues with ColDesi support before using these typical settings.
Source: ColDesi
Summarized from the linked source. Test on scrap before production runs.