DTF Station Aries UV DTF (DigiRIP) / UV DTF transfer film (Aries Production Res mode)

UV DTF transfer film (Aries Production Res mode) on DTF Station Aries UV DTF (DigiRIP)

official

Layer order

White underbase → Color → Clear varnish

White layers

Maximum White Ink Percentage 100% (Underbase and Highlight enabled); choke example value 2 (increase if white edges show)

CMYK layers

per profile

Varnish

Apply clear; Maximum Clear Ink Percentage default 45% (raise to 55–65% for thicker varnish); Spread the Clear Ink example 5 (lower on clear substrates)

Print mode

DigiRIP Q Properties → Color Layer / Clear and Other Spot Options; also mirror settings into Manage Print Modes

Durability

Higher clear spread improves durability; excess clear shows on clear substrates

Notes

Concrete DigiRIP example values from DTF Station KB for Aries UV DTF. Apply same settings in both Q Properties and the active Print Mode.

Source: DTF Station · 2026-04-20

Summarized from the linked source. Test on scrap before production runs.