Mimaki UCJV300 (clear + color + white) / Media for White→Color→Clear (Glossy) with pull-back

Media for White→Color→Clear (Glossy) with pull-back on Mimaki UCJV300 (clear + color + white)

official

Surface prep

Pinch-roller pressure H on first print; after pull-back ends H / intermediates OFF (UCJV300 defaults)

Layer order

White (pull-back after print) → then Color + Clear (Glossy) 2-layer pass

White layers

White job with Pull back after Print checked

CMYK layers

Varnish

Clear (Glossy) composited; Layer job 2/2 Special Color Over Print = Color → Special Color

Print mode

Glossy recommended: 600×1200 or 1200×1200 VD, 32/44 pass, Bi-direction, High speed; do not set Special Color Over Print to Simultaneously for glossy composite

Durability

Pull-back can misalign; max feed length notes apply on UJ330H (1000 mm / 850 mm with auto deskew)

Notes

Glossy clear+white uses pull-back so white prints first, media returns, then color+gloss clear.

Source: Mimaki · 2026-08-07

Summarized from the linked source. Test on scrap before production runs.