HeyGears G1X / Full-color 3D resin print (3D mode)

Full-color 3D resin print (3D mode) on HeyGears G1X

video

Surface prep

Swap the 2D ink reservoir for the empty 3D resin reservoir (about 30 min) to avoid UV ink / resin cross-contamination; recalibrate; connect resin station

Layer order

White core > color outer layer

White layers

White core

CMYK layers

Color on visible outer layer only

Varnish

Spray gloss varnish after printing

Print mode

Full-Color 3D Printing with water-soluble supports

Durability

Colors come out slightly washed out because only the outer skin is colored

Notes

Drop the finished print in water; supports fully dissolve in about a day with no support scars. A light gloss spray coat brings the color forward (HeyGears does the same finishing step). Resin station holds 1 L each of CMYK and varnish/support plus 2x white.

Source: DraftID · 2026-10-21

Summarized from the linked source. Test on scrap before production runs.