eufyMake E1 / Dark surface or clear / UV DTF (white underlay check)

Dark surface or clear / UV DTF (white underlay check) on eufyMake E1

video
Surface prep
Run Device Settings > Test Print after leaving maintenance mode; cover platform as prompted
Layer order
White under color (when needed)
White layers
2
Print mode
Flat
Notes
Creator stresses two white layers on dark or clear is enough; five or six white layers means white ink is not firing correctly. A correct nozzle test shows solid white in the white band; a bad test looks nearly blank in that band. Maintenance mode every ~3 days.
Source: Silhouette School · 2026
Summarized from the linked source. Test on scrap before production runs.