Glass / metal / acrylic (slick surfaces) on eufyMake E1

official

Surface prep

Wipe with IPA; optional light scuff 400–600 grit

Primer

Adhesion promoter thin even layer; let dry

Layer order

White>CMYK

White layers

preset

CMYK layers

Print mode

Flat

Durability

Promoter improves bond on slick materials; some makers use flame treatment (advanced)

Notes

Official tip #26: pretreat slick glass/metal/acrylic; also Zero-Point Alignment unlocks up to 130 mm object height vs ~60 mm standard

Source: eufyMake Team · 2026-08-03

Summarized from the linked source. Test on scrap before production runs.